INFO: +49 (0)5744 - 45 75
B190KF | FrontsideB190KF | RearsideB190KF | Automatic edge feeding for roller material over turntable D=800mm.B190KF | Pre-milling unit: two reverse, operating-controlled pre-milling units, with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material.B190KF | Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue with teflon coated glue roller. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on).B190KF | Pneumatically operated cut-off knife from roll material up to 3mm edge thickness.B190KF | Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one smaller pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece.B190KF | High-frequency cut-off saw equipped with one HF motor 0.22 kW, 12,000 rpm , 2 saw blades and highprecision linear guides ensure a clean and precise saw cut.B190KF | High-frequency top and buttom milling station, 2 powerful 0.37 kW, 12.000 rpm high-frequency motors with HM-WPL multi-profil millers; suitable for flush, bevel, radius and 30° milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle Ø 100mm; height adjustment of the upper aggregate with the top roll pressure.B190KF | Glue scraper unit: removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface.B190KF | Layout

B190KF

EDGE BANDING MACHINE

One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure and work piece support. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 6.0mm and of 10 – 60mm work piece thickness.

  • Workpiece widthmin. approx. 80 mm
  • Workpiece thickness10 – 60 mm
  • Workpiece lengthmin. approx. 140 mm
  • Edging thickness0,4 – 6,0 mm
  • Adjustable cutting depth pre-milling unit0,4 – 2,0 mm
  • Max edge thickness= Workpiece thickness + 4mm (2+2)
  • Electrical connection400V, 50 Hz , 3Ph
  • Total load5,9 kW
  • Feed speed10 m/min.
  • Air connection6 Bar
  • Net weight670 Kg
  • Automatic edge feeding for roller material over turntable D=800mm
  • Pre-milling unit: two reverse, operating-controlled pre-milling units, with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material
  • Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue with teflon coated glue roller. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on)
  • Pneumatically operated cut-off knife from roll material up to 3mm edge thickness
  • Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one smaller pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece
  • High-frequency cut-off saw equipped with one HF motor 0.22 kW, 12,000 rpm , 2 saw blades and highprecision linear guides ensure a clean and precise saw cut
  • High-frequency top and buttom milling station, 2 powerful 0.37 kW, 12.000 rpm high-frequency motors with HM-WPL multi-profil millers; suitable for flush, bevel, radius and 30° milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle Ø 100mm; height adjustment of the upper aggregate with the top roll pressure
  • Operating panel (PLC) with LCD display controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates, meter counter and error diagnosis
  • Glue scraper unit: removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface